3 Most Popular Heating Systems in Ireland – To Ask Your Contractor About

We all know heating systems are essential to help us through the Irish winters and keep a happy home. Homeowners are continually searching for ways to better their comfort, be friendly to the environment, and save on energy costs. This has led to particular heating systems choices - and these are the 3 most popular ones Dublin contractors are asked about.


What are the 3 Most Popular Heating Systems in Ireland?

Heating systems contractors in Dublin are often asked about these 3 heating practices. If you're looking for a new heating system - ask your professional about the following:


1. Underfloor Heating

Underfloor heating is arguably the most popular choice for heating systems in Ireland. The well-rounded home asset delivers a comforting level of warmth throughout your home - not just where the heat sources are. They are one of the most energy-efficient and practical ways to warm up your house on colder days.

Heating systems contractors in Dublin find themselves asked pretty frequently about installing Underfloor Heating Systems. They are easy to install for both new homes and existing ones and easily controlled by a thermostat. Not to mention - they don't require a lot of maintenance either. Once installed, a contractor will rarely have to fix it again.


2. Air-to-Water Heat Pumps

Another heating system in Ireland gaining in popularity is the air-to-water heat pump. The main factor that catches homeowners' interest is how much money these nifty devices save on heating bills - even up to 75%. They are being lauded as one of the most efficient heating systems currently available on the market.

The air-to-water heat pump works by absorbing air from the outside, then refining it into usable heat from your radiators and water systems. More and more businesses adopt these heating systems as they are very effective in large spaces - heating thoroughly and saving costs. A good heating system contractor in Dublin will be able to install an air-to-water heat pump without hassle.


3. Solar Panels

As Ireland becomes more eco-friendly - solar panels are present in an increasing amount of Irish homes. While it may take a bit more investment to get this heating system installed - it yields bountiful rewards once it's ready to go. Homeowners will find that their energy bills will be reduced to a fraction of what they once were. Solar heating systems do not require too much maintenance either.

Heating systems contractors in Dublin are being asked about these more - and a proficient one should have the answers you seek. Installing solar panels on your home will require a bit more planning - but it is the heating system of the future. It's worth taking the leap now - because it's likely most new homes will have these heating systems.


Want One of The Above? There are Heating Systems Contractors in Dublin That Can Help!

Quality heating systems contractors in Dublin will know the details of the most popular ones in Ireland. If you're looking to change up your current system - or need some fine-tuning of an existing one - contact us - Dublin-based plumbing and heating contractor. No questions are too challenging or too easy - and the heating system will be installed function perfectly!

Call us today on 01 437 9577, on the mobile: 087 276 8007 or email us: murphykieron@ymail.com


Heating Systems for Homes – Which One Will Save You Most Amount of Money

If there are two things Irish homeowners love, it's good heating in the wintertime and saving money. Who said that you couldn't have the best of both worlds? Remarkable advancements in heating systems for homes are now allowing houses to save more than ever on household energy bills - and some really help cut costs.


4 Heating Systems For Homes That Can Save You Money

Revolutionary new heating systems are coming out all the time with the promises to save you money. Those who enjoy having a bit of extra cash are constantly on the lookout for ways to optimize household costs, and heating is definitely at the forefront of interest. We've tried and tested the best heating systems and found the ones that will save you the most money.


1. Solar Heating System

The upfront costs of a solar heating system may be a little steeper - but the amount of money you can save in the future makes it worthwhile. By its namesake, the solar system uses sunlight to heat up your home. Maintenance costs are minimal and can save up to 75% on heating bills in Ireland.


2. High-Efficiency Boiler

Furnaces and boilers may sound a bit dated - but there are newer models of very affordable boilers. Most importantly, they are very efficient. Making them an excellent choice as a heating system for your home. They can save quite a bit on your energy bills - as well as being easy for a professional to install in your home.


3. Wood Pellet Heating System

Wood pellet heating systems for homes are some of the most efficient devices out there. It's estimated that it can save up to 80% on your energy bills and not too expensive to install. The heating system burns waste wood, so fuel is cheaper to obtain, with no carbon dioxide emissions being created from the boiler. The downside is they might need a bit more maintenance.


4. Underfloor Heating System

One of Ireland's most popular heating systems for homes is the underfloor system. It might be a tad bit more expensive to run than the others - but it evenly distributes heat around your house for maximum comfort. Most new installations are energy efficient, so you will still be saving more on bills than conventional boilers.


Which Will Save The Most Money?

Sometimes that amount of the most energy-efficient won't save you the most money. The 4 heating systems for homes listed above are definitely some of the best options - but there are other factors to consider. Installation and maintenance costs may differ in your home, pending its viability with the heating system. Professionals will always be able to let you know exactly how much each system will save you altogether.


Who Can Help Install The Heating Systems?

Once you've found the right money-saving heating system for your home - good contractors in Dublin can help install them. We are very affordable and will install the heating system as efficiently as possible to save you cash.

Just contact us on 01 437 9577, on the mobile: 087 276 8007 or email us: murphykieron@ymail.com and lets talk.



4 Ways to Save Money with Heating & Plumbing System for Your Home

One of the most frustrating and costly aspects of homeownership throughout Dublin - and Ireland in general - is energy and utility bills. Plumbing and heating systems may be inefficient and generating colossal expenses to pay every month. Finding the solutions can be tricky, given how unique some devices are and their complicated mechanics.

Luckily, some experienced plumbers understand the ins and outs of these systems. Plumbing and heating services Dublin can apply expertise and install new equipment that can save money on your bills. We'll share a few tips on how the right plumbers are worth having to come to take a look at your heating and plumbing systems.


4 Ways How a Plumber Can Save You Money For Your Heating and Plumbing Systems

We understand you might be a bit skeptical about the idea that a plumber can save you money. There's always a stigma attached to a contractor - they are trying to get the most cash out of clients. This is not true all the time! There are plumbing and heating services in Dublin that are proud of their trade and committed to helping communities save money. Here are four ways on how plumbers can help:


1. Organizing a maintenance schedule

Having a friendly plumber on hand can actually save you money on your heating and plumbing systems. If you organize a schedule for the maintenance professional to regularly visit - they can ensure everything is working well. Plumber call-out fees are much cheaper than fixing broken systems - and they might even give you a discount for regular work!


2. Checking your heating and plumbing systems for efficiency

Heating and plumbing systems can use up more energy than needed - mainly because they or outdated or have some malfunction. Getting a plumber to investigate the devices could yield an understanding of why your energy bills are so high. They will be able to make suggestions on how to improve efficiency and get costs down.


3. Replacing heating and plumbing systems that use a lot of energy

Plumbers are well-versed in the latest and greatest of heating and plumbing systems that save clients money. They can perform an energy audit of your home - walking you through the reasons why your bills may be high. A good plumber will know precisely what heating and plumbing system would be best for your home - and how it will save cash in the future.


4. Getting a good clean of your heating and plumbing systems

One thing that requires a bit of a plumber's expertise is cleaning heating and plumbing systems. To get the most value for your money - pipes and radiators should be free of sludge that can build up over time. Some plumbers will happily get your systems thoroughly cleaned to make sure no unnecessary energy is being expended.


Plumbing and Heating Services Dublin Are At Your Service!

Saving money on energy shouldn't have to be a challenge - it should be a right. There are plumbing and heating services in Dublin that serve as a helping hand in achieving those bill reductions. There's one here that will guide you through the entire process with a smile - honest, transparent, and dedicated to savings.


If you would like to save money with heating and plumbing system, feel free to contact our experts on 01 437 9577, on the mobile: 087 276 8007 or email us: murphykieron@ymail.com and lets talk.


4 Types Heating Systems For Homes: The Pros and Cons

When it comes to installing a new central heating system it can be a difficult job sifting through the information in order to choose the right one for you.

Not just that but there’s a vast range of types, styles and variations of heating systems for homes to choose from.

Here are four of the most popular with their pros and cons to get you started:

1. Oil

Home heating oil is used in a ‘wet’ system where an oil-fired boiler heats water that provides central heating via radiators, and hot water via taps. The main difference between gas and oil systems is that oil is delivered to your home as you need it and stored in an external tank, whereas gas is supplied through a direct feed to your home.

Pros of oil Heating

Home heating oil is a highly efficient fuel, and modern condensing boilers are now 90% efficient, or more. If your boiler is more than 15 years old you may want to consider replacing it with a more modern and energy efficient model. Replacing old or out-dated boilers is relatively straight-forward, and heating your home with oil is usually cost-effective provided the changeable oil prices are low.

Cons of oil Heating

As a fossil fuel, oil produces carbon dioxide when it is burned, so it is not considered to be a clean or sustainable source of energy. The price of heating oil can fluctuate significantly, which means it can be an expensive way to heat your home depending on the current oil prices. Prices are impacted by weather conditions, seasons, demand, and even political unrest.

2. Gas

With current gas prices, a gas central heating system can be a cost-effective way to heat your home, provided you are connected to the national gas grid. Gas central heating is a ‘wet’ system, which means a gas-fired boiler heats water that is pumped through your radiators and hot water taps.

Pros of Gas Heating

Gas is a highly efficient fuel, and modern condensing boilers also have very high efficiency – in some cases up to 90% or more. Gas is piped directly into your home, so you don’t need to store any fuel and you won’t run out of fuel unexpectedly (unless there is a problem with the local supply).

Cons of Gas Heating

As a fossil fuel, gas produces carbon dioxide when it is burned, so it is not considered to be a clean or sustainable source of energy. Gas heating systems need to be maintained regularly, and by law engineers carrying out the work must be a Registered Gas Installer. If you don’t already have a gas heating system, installation can be expensive and disruptive, especially if your home is not already on the gas network.

3. Electric – Storage Heaters

Overnight storage heaters are the most cost-effective form of electric heating. Storage heaters contain bricks that are heated overnight using off-peak electricity, with the stored heat released slowly during the following day. Storage heaters typically have two controls – one to control how much electricity is used, which determines how much heat is generated and stored, and a second control to determine how much heat is released.

Pros of Electric Heating

Almost every home is capable of using electric heating. Electric storage heaters are typically cheaper to install than other forms of central heating systems, and they typically don’t require much maintenance. Electric heating systems also do not require annual servicing.

Cons of Electric Heating

While often cheaper to install compared to other types of heating system, electric heating is usually the most expensive to run. Currently, electricity is around three times more expensive per unit than gas, and prices continue to rise. Electric storage heaters can also be difficult to control – if you haven’t had the heating on for a few days and turn your storage heaters on, you won’t benefit from heat until the next night. As a result, heating requirements need to be planned in advance so that the heat is available for you to use when you need it.

4. Solar Thermal  

Gas and electricity prices continue to rise, and oil prices fluctuate considerably. You could cut your household energy bills by installing a renewable heat technology, such as solar thermal heating. In addition, generating your own energy for heat reduces your carbon footprint and is environmentally friendly.

Pros of Solar Thermal

Generating your own energy for heat could reduce your utility bills by up to 70%. Most solar heating systems come with a five-year or ten-year warranty, and they require little maintenance. The system won’t need an annual service, though it is recommended that the system is inspected every 3-7 years. The Sustainable Energy Authority of Ireland (SEAI) offer up to €1200 towards the cost of installing a solar thermal system to all homeowners, including landlords, whose homes were built and occupied before 2011. For more information, go to: www.seai.ie/grants/home-energy-grants/solar-water-heating-grant/.

Cons of Solar Thermal

The upfront cost of installation may seem more expensive, but over the lifetime of the system you will reap the rewards. Not every home is a suitable candidate for solar thermal heating, or even other kinds of renewable technologies.

We are here to help should you need us, send us a note from our Contact Us page, or give us a call on the numbers below:

01 437 9577


7 Steps to Bleed Your Home Heating System Before Considering an Oil Boiler Service

One of the most common call-outs for plumbers in Dublin is to bleed an oil-fired boiler. However, if you are confident and prepared you can do this task yourself.

By following the series of simple steps it means you can undertake this, without the need for an expensive visit.

The first of these is to turn off the boiler before starting, then:

Step 1

Find the bleed screw. It is usually near where the fuel line comes into the pump. On most oil fired central heating systems boilers it is a small, nipple-like, screw.

Step 2

Put a bucket or pan under the bleed screw to catch any fuel that may spill as you bleed. If there is not space for a bucket a foil tray will do. Alternatively you can put tubing over the bleed screw to drain to a bucket.

Step 3

Using a small wrench (crescent) or pliers slightly loosen the bleed screw, but be careful to only slightly loosen the screw as you don’t want it to drop and be lost in the oil.

Step 4

Push the restart button on the boiler. As the furnace begins it will suck fuel in and air and fuel will begin to come out of the bleed screw.

Step 5

Keep your wrench/pliers ready to tighten it when the sputtering of air and fuel ends. It may take a number of attempts. If the furnace cycle ends before the sputtering stops hit the reset button again. Some central heating systems may prevent more than two or three attempts. If that happens just hold the reset button in for several seconds to restart the process.

Step 6

As soon as the sputtering stops and a flow of fuel is coming out of the bleed screw tighten the screw. Make sure not to over-tighten as this will strip the screw, making for an expensive job to replace it.

Step 7

Let your furnace run as it should be fine now. If it fails to restart repeat the above steps.

However, if all this fails it may be more air in the system than can be dealt with, or other blockages are present. If that’s the case you probably need a boiler service and getting a good, qualified plumber in Dublin is essential when having repair work done on heating systems for homes.

If you need plumbing or heating specialist, we are always here to help. Contact us today!

01 437 9577